gear drive
英 [ɡɪə(r) draɪv]
美 [ɡɪr draɪv]
齿轮驱动
双语例句
- According to the relative position of sub-gear axis parallel shaft spur gear drive, bevel gear drive shaft and intersecting cross-axis helical gears.
按齿轮轴线的相对位置分平行轴圆柱齿轮传动、相交轴圆锥齿轮传动和交错轴螺旋齿轮传动。 - Using this method, we can protract vector analysis atlas of planetary gear drive mechanism.
应用此方法，可定性地绘制出行星齿轮传动机构速度分析图谱。 - Gear Drive agitator with complete support assembly.
齿轮传动搅拌器装配完整的支持。 - Motion state of the plate turnover machine of gear drive type, double-arm crank rocker type and hydraulic type has been analyzed deeply.
对齿轮传动式、双臂曲柄摇杆式、液压式翻板机的运动状态进行了较深入的分析。 - The transmission errors and the distribution of contact path were simulated with computer in the misaligned gear drive.
通过计算机仿真了在装配误差存在条件下传动误差和啮合印痕在齿面的分布状况。 - Analyses and Control Method of the Gear Tooth Contact Pattern in Gear Drive
齿轮传动中的齿面接触斑点分析与质量控制 - Multiple objective optimizing design of a new planetary bevel gear drive device with small teeth difference and inclined plate;
对斜盘式锥齿少齿差行星减速器的一些重要传动元件的制造方案进行了系统研究和论证。 - Adopt crank shift, link mechanism, and gear drive to improve work efficiency.
采用曲柄、连杆机构，齿轮传动，省力是提高工作效率的利器。 - Feasibility Research of Pure Pneumatic Wave Generator in a Harmonic Gear Drive
谐波齿轮传动中纯气动波发生器的可行性研究 - For this purpose the coordinates are built of the point contact orthogonal face gear drive which take into consideration its assembly deflection errors.
为了分析装配偏置误差对正交面齿轮传动接触特性的影响，建立了考虑装配偏置误差影响的点接触正交面齿轮传动坐标系； - Influence of the Harmonic Gear Drive Torsion Stiffness on Crack
裂纹对谐波齿轮传动扭转刚度的影响 - When designing gear drive and other vehicle parts, this can apply similar method too.
在设计齿轮传动和其他汽车部件时，也可以应用类似的方法。 - Considering the system errors of gear drive and teeth synthetic flexibility, the loading point of bending strength was studied.
考虑系统误差和轮齿综合柔度，对齿轮弯曲强度的计算力点进行研究。 - A permanent magnetic epicyclic gear drive was presented, and its geometry and kinematics were analysed by applying the principles of epicyclic gear drive and electromagnetics integratively.
综合应用行星齿轮传动原理和电磁学原理，对永磁行星齿轮传动进行了几何学和运动学的分析。 - This paper studies the relief grinding problem of the hob of point contact worm gear drive and puts forward a one-parameter enveloping method to calculate the axial profile of relief grinding wheel.
本文研究了加工经可控曲率修正的蜗轮齿面的滚刀设计问题，建立了相应的数学模型，并应用计算铲磨蜗轮滚刀刃形曲线的单参数包络法，求出铲磨砂轮截形曲线。 - There are built with a worm gear drive which has proven to be kinematically ideal for fast bi-directional rotation, Rotary axis is driven with gears via Servo motors.
存在与蜗轮传动的运动学已经被证明是快速的双向旋转的理想建成，旋转轴是通过伺服电机驱动，齿轮。 - Meshing parameters in harmonic gear drive are optimized in the paper. Wherefore writer carries out another iterative computation.
一齿轮与另一齿轮啮合.文中对谐波齿轮传动的啮合参数进行了优化设计。 - The end face harmonious gear drive of oscillating teeth is a new type of driving device, which combines the advantages of the common harmonic gear drive and the oscillating tooth drive.
活齿端面谐波齿轮传动是综合传统的谐波齿轮传动和活齿传动的优点而发明的一种新型传动装置。 - It synthesizes the advantages of belt drive, chain drive and gear drive.
它综合了带转动、链转动和齿轮转动各自的优点。 - The Comparison of Two Design Methods for Standard Spur Gear Drive
两种标准直齿圆柱齿轮传动设计方法的比较 - Accurate checking of contact strength of tooth surface and calculating method of design for helical gear drive
螺旋齿轮传动精确的齿面接触强度校核与设计计算方法 - To improve tooth strength and make tooth grinding implement for face gear, a new generating method of face gear drive has been proposed, and the meshing characteristics are investigated.
为了提高面齿轮副的强度并解决其磨齿问题，提出了弧线齿面齿轮副的一种新的加工方法，并研究其啮合特性。 - A new concept of transmission-tribology and transmission-tribology design based on the investigation of development and existing problem of the gear drive and tribology is proposed.
针对齿轮传动与摩擦学中的研究进展及所存在问题，提出了传动摩擦学及传动摩擦学设计新概念。 - A new version of face gear drive geometry was proposed as envelopes of two parabolic racks of the pinion and shaper in the profile.
提出了一种沿齿廓方向抛物线修形的面齿轮齿面结构，对传统斜齿面齿轮和修形的斜齿面齿轮副的啮合进行了比较。 - Design and Calculation of Planetary Gear Drive of the Few Difference in Number of Teeth and the CAD
少齿差行星齿轮传动的设计计算与计算机辅助设计 - The Fuzzy Reliability Optimization Design of Arc Teeth Cylinder Gear Drive
圆弧齿圆柱齿轮传动的模糊可靠性优化设计 - Finite element analysis of ring gear in circle movable tooth gear drive
圆形活齿行星传动中内齿圈应力的研究 - Fabric take-up and batching mechanism, which used change gear drive for adjusting the fabric density.
采用交换轮调节织物密度的牵拉卷取机构。 - Used part of the rotor pump is a simple spur gear drive motor, electric screw fixation using pin.
部分转子泵采用的是简单的直齿轮驱动电机，电机采用地脚螺钉固定。 - Tooth Contact Analysis and Simulation Study of Mismatched Worm Gear Drive
非对偶蜗轮蜗杆传动齿面接触分析与仿真研究